Features and Benefits of LED Flexible Light Strips
From：2024.04.11
The LED flexible light strip uses FPC as an assembly PCB circuit board, and uses SMOLED to assemble it, which is only as thin as a coin and does not occupy indoor space. There are many specifications and models, and it can bend, telescopic and reverse the wire at will, which can be moved or telescopic in three-dimensional space and is not easy to break, which is suitable for application in the field where the appearance is not standardized or the indoor space is narrow. LED flexible strip because it can be bent and reversed at will, so it can be used in the design and decoration of a variety of graphic design, SMD3528, SMD5050, SMD5730, SMD2835 is the LED LED light bead model specification of LED flexible light strip. LED flexible light strip is easy to produce the problem of color drift when pouring glue or dropping glue. Generally speaking, the color temperature of LED flexible strip products will be higher than the original color temperature of LED lamp beads. In other words, when the surface layer of the LED beads of the LED flexible strip is glued, its color temperature changes. There are two ways to ensure the color temperature, one is to moderately reduce the color temperature of the LED beads applied to the LED flexible light strip, and select the LED lamp with good color tolerance beads, so that the color temperature of the LED flexible light strip after glue filling can be specified in the design scheme; The second is to select cost-effective super glue and glue potting or glue dropping processing technology, such as the use of fully transparent silicone rubber, and make the glue filling height-to-width ratio just exceed the surface of the LED lamp beads.
When the LED flexible light strip is glued, its color temperature will be higher than the original color temperature of the LED lamp beads. The higher the original color temperature of the LED lamp beads, the greater the distance between the color temperature of the blue view LED soft light strip after glue filling and the original color temperature of the LED lamp beads, and the difference in color temperature is 200~600K. Different glue potting processing technology will produce different color temperature errors, please specify the glue filling process according to the specific situation. It is best to choose the same gear (the same BIN) for the LED lamp beads in the design scheme or manufacturing, and the color tolerance should not exceed 3SDCM. If the volume of commercial goods is relatively large, you can select the LED lamp beads in the three main gears of the national industry standard color temperature, and stipulate that the description difference does not exceed 3SDCM. At the same time, it is stipulated that the LED lamp beads of the same batch number are in the same gear ((same BIN), which is convenient for manipulating the color tolerance within 3SDCM. For LED flexible strips that can change light, it is necessary to pay attention to the size, gear (BIN), color tolerance, and manufacturer of the LED chip in the design scheme. The LED flexible light strip with high-brightness imported genuine LED lamp beads is brighter, has less calorific value, can be maintenance-free, easy to install, and can adjust the lighting angle with the change of installation conditions. Note: FPC is a kind of printed circuit board made of polyacrylonitrile or polyester film as a sheet with extreme stability and excellent flexibility; The waterproof solution of LED flexible light strip is divided into surface glue, waterproof casing waterproof, solid core waterproof (U-shaped tank epoxy resin), glue filling waterproof (waterproof casing epoxy resin); When installing the Blue View LED flexible light strip, the installer only needs to remove the protective paper from the double-sided tape and stick it to the place where it must be assembled.
